Once RTOs receive registration, they must oversee many aspects such as annual declarations, AVETMISS reporting, and marketing compliance. Of all these duties, validation is frequently the most daunting.
Although we have published several articles on validation, let’s revisit the term. ASQA describes validation as a quality review of the assessment process.
Validation involves verifying which areas of an RTO's assessment process are correct and highlighting where improvements are needed. Understanding its key components makes the task less intimidating.
According to Clause 1.8 of the SRTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and are conducted according to the Principles of Assessment and Rules of Evidence.
The standards specify that two types of validation need to be performed.
The primary type of assessment validation verifies that your RTO's assessment meets the training package requirements.
The second validation ensures assessments are conducted according to the principles of assessment and rules of evidence.
Therefore, validation is conducted both before and after the assessment. This article emphasizes the first type: assessment tool validation.
Breaking Down the Two Types of Assessment Validation
The Essence of Assessment Validation
As noted earlier and in our earlier blogs, validation is divided into two stages: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, sometimes called pre-assessment validation, focuses on ensuring all unit requirements are met, in line with the first part of the clause, ensuring complete workbook compliance.
On the other hand, post-assessment validation deals with implementation, ensuring Registered Training Organisations follow the Principles of Assessment and Rules of Evidence.
We will dedicate this article to assessment tool validation.
The Process of Assessment Tool Validation
Having discussed the two types of validation, let’s delve into assessment tool validation.
Best Times to Conduct Assessment Tool Validation
Assessment tool validation aims to verify that all elements, performance criteria, and performance and knowledge evidence are covered by your assessment tools.
This means that whenever new learning resources are acquired, assessment tool validation must be performed before they are used by students.
There's no requirement to wait for your next 5-year cycle validation schedule. Validate new resources promptly to ensure they’re ready for students.
However, there are additional reasons to conduct this type of validation. Perform assessment tool validation also when you:
- updating your resources
- new training products are added by you on scope
- reviewing your course against training product updates
- learning resources are identified as a risk during your risk assessment
The Australian Skills Quality Authority's risk-based regulatory approach means RTOs should conduct regular risk assessments. Complaints from students about learning resources are a prime opportunity for assessment tool validation.
Which Training Products to Validate?
It's important to remember this validation ensures that all learning resources are compliant before use. All RTOs need to validate resources for each unit.
Getting Started with Assessment Tool Validation: Resources Needed
Educational Materials
For validation of your assessment tools, you will require the full set of your learning resources:
Mapping tool – the initial document to investigate. It identifies which assessment items address unit requirements, helping speed up validation.
Learner/student workbook – ensure it is suitable as an assessment tool during validation. Check if instructions are clear and answer fields are sufficient. This is a common issue.
Assessor guide/marking guide – verify that instructions for assessors are comprehensive and clear benchmarks for each assessment item are present. Clear benchmarks are key to reliable assessment outcomes.
Other related resources – may consist of checklists, registers, and templates developed independently from the workbook and marking guide. Validate them to confirm they suit the assessment task and address unit requirements.
Panel for Validation
Clause 1.11 defines the requirements for validation panel members, stating validation can involve one or more individuals. RTOs usually require all trainers and assessors to be present, sometimes including industry experts.
Overall, your validation panel should have:
Up-to-date vocational competencies and industry skills pertinent to the unit being validated
Recent knowledge and skills in vocational teaching and learning
Any one of the following training and assessment qualifications:
TAE40116 Certificate IV in Training and Assessment or its successor
Assessment validation tool/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool is advantageous for both the validation process and documentation. It aids in viewing how each assessment item matches each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Simultaneously, it can serve as proof that you have validated your resources before they are used by students.
Although ASQA does not recommend or require a specific template for assessment tool validation, numerous templates can be found online. These tools typically have validators examine the tools holistically to determine if they meet the principles of assessment.
Assessment Principles Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Although these templates ease the validation process, they can cause errors in judgment as there is minimal space for commenting on each assessment item.
It is advisable to use a more detailed template to inspect each unit requirement and its corresponding assessment items. Below is an example:
Element Performance Criteria Assessment Directions Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What to Inspect?
As discussed in our blog post Common Problems In Assessment Tools, it’s essential that your assessment tools enable trainers to follow assessment principles and evidence rules.
Fundamental Principles of Assessment
Fairness – Are equal opportunity and access ensured for everyone in the assessment process?
Flexibility – Does the assessment provide different options to demonstrate competence according to individual needs and preferences?
Validity – Is the assessment assessing what it is intended to assess? Is it a valid tool for evaluating the required skill or knowledge?
Reliability – Will the assessment produce the same results each time, regardless of who conducts the training? Will different assessors make consistent decisions on skill competence?
Evidence Core Rules
Validity – Is the evidence confirming that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there adequate evidence to ensure the learner has the required skills and knowledge?
Authenticity – Is the assessment tool verifying that the work is the candidate’s own?
Currency – Do the assessment tools reflect current units of competency and modern industry practices?
Even though these are often covered in VET professional development and nationally recognised training, many tools still struggle with these requirements.
To avoid using learning resources that leave certain unit requirements unaddressed, ensure you adhere to these guidelines:
Follow Through with Actions
Take note of the verbs used in the unit requirements and make sure they are addressed by read more the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Complete each of the following actions at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication as per service and regulatory requirements:
diaper changing
prepare bottles, bottle feed infants, and clean equipment
solid food prep and feeding babies
respond to infant signs and cues appropriately
prepare infants for sleep and soothe them
monitor and encourage physical exploration and gross motor skills suitable for the age
Having students explain the process of nappy changing for babies under 12 months doesn’t meet the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.
Keep an Eye on Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby is not sufficient.
Total or Not Competent
Mind the lists. In the previous example, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Add More Specificity
Every assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on student competence. Consequently, ensure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What sort of information can be included in a work package?
Possible answers include:
Needed materials
Corresponding costs
Time required for activities
Specified roles and responsibilities
When an assessment item demands multiple answers, indicate the number of answers a student must provide. This ensures your assessment is reliable, and the evidence collected is valid.
The same applies to assessment items with double-barrelled questions or those asking for multiple answers simultaneously. These can confuse both students and assessors, as shown in the sample question below:
Name a hazard and/or environmental concern in the work area and choose the most effective hazard control hierarchy.
Answers may include, but are not limited to:
Weather conditions – isolating the work area, engineering controls, personal protective equipment
Work area and ground conditions – elimination, isolation, engineering
People – isolating, use of engineering controls, administrative controls
Structural hazards – substituting, isolation, engineering controls
Chemical hazards – isolation, use of engineering controls, administrative controls
Equipment or machinery – isolation, use of engineering controls, administrative controls
Steering clear of double-barrelled questions simplifies responses for students and enables assessors to accurately judge competence.
Seeing these requirements, you might think, “Don’t learning resource developers offer audit guarantees?” However, with such guarantees, you must wait for an audit to rectify noncompliance. This affects your compliance history, so it’s better to take a safe and compliant route.